Cat6a Patch Cable
-
- Conductors: 24AWG or 26AWG stranded bare copper.
- INsulation: polyolefin
- Color code:
pair1: blue ,white/blue
pair2: Orange, white/orange
pair3: Green, white/Green
pair4: Brown, white/brown - Ripcord: under jacket
- Jacket: PVC or LSZH
- Standards: UL444/CSA-C22.2 No 214,Type CM
EIA/TIA-568A and EIA/TIA-568B.2,Horizontal cable
- Applications: internet, computer
- UTP: unscreen cable
- STP : single shielding Network cable ,Mylar tape,Aluminum-mylar tape and Drain wire
- SFTP: Double shielding cable,Mylar tape,Aluminum-Mylar tape and drain wire and bare or tinned copper braid
- Network cable Connector detail specification:
RJ45 8P8C nickel type
RJ45 8P8C golden type
| ANSI/TIA/EIA-568-C.2 | T568A & T568B |
| ISO/IEC 11801 | 8-position conductor/pair assignment (1-2/3-6/4-5/7-8) |
| Pair Identification | Pair1= Blue/White Pair2= Orange/White Pair3= Green/White Pair4= Brown/White |
| Transmission Performance | NSI/TIA-568-C.2 category 7 (1-750 MHz) specifications |
| Cordage | |
| Constructor | 4 pairs, 7 strands,28 AWG, SFTP |
| Cable Type | SSTP Cat.7 Patch Cable |
| Outer Cable Diameter | 6.0mm ± 0.2 mm |
| Outer Jacket | PVC/LSZH Jacket |
| Plug | |
| Type | Shielded RJ45 8P8C Modular Plug |
| Housing | UL listed 94V-0/1/2 flame retardant polycarbonate |
| IDC blades | phosphor bronze, gold plating over 100 μin of nickel in contact area |
| Retention | 50 N (11 lbf) for 60±5 s |
| Mating cycle life | min 750 cycles |
| Tensile strength | ≥ 20 N per wire |
| Installation Temperature | 0°C to +60°C |
| Operating temperature | -20°C to +60°C |
| Minimum bend radius | 4 outer cable diameters |
| Boot Type | Any type of the above picture |
| Length | 0.3m-30m or As per requested |
| Color | Grey/Green/Blue/White/Black/Red/Yellow |
| Package | polybag or Blister Package |